Blog
Custom Saw Blades: The OEM and Private Label Guide
In September, a buyer in Rotterdam sent the same request to three blade factories: 2,000 custom saw blades, his logo on the plate, retail packaging. The quotes came back at €1.80, €2.60, and €3.40 per blade. None of the suppliers…
Abrasives for Stainless Steel: Disc Selection and Contamination Control
Choose abrasives for stainless steel that the manufacturer approves for your exact operation, then keep them dedicated to stainless work. Check the tool, finish and handling rules before you approve a disc. A new INOX disc cannot protect a part…
Import Saw Blades from China: Supplier & Customs Guide
To import saw blades from China, you need four things in the right order: a written blade specification, a verified factory, a passed sample test, and the correct HS classification. Most first-time buyers get the last two wrong, and the…
Flap Disc Grit Selection: Match Removal and Finish
Start flap disc grit selection with the material you must remove, the metal you must preserve, and the finish you must achieve. Lower grit numbers generally suit heavier removal; higher numbers suit finer blending and finishing, subject to the exact…
Flap Disc vs Grinding Wheel: Removal, Blending and Finish
For flap disc vs grinding wheel selection, start with the amount of metal to remove and the surface you must leave. A suitable bonded wheel is a starting choice for heavy removal; a suitable flap disc can remove metal and…
Circular Saw Blade Sizes: Complete Arbor and Diameter Chart
Circular saw blade sizes run from about 3 inches to 16 inches in diameter. Handheld saws use 5-1/2 to 7-1/4 inches, most commonly 7-1/4 inches with a 5/8-inch (15.87 mm) arbor. Table, miter, and cut-off saws use 8 to 16…
Cutting Disc vs Grinding Disc: Intended Use, Wheel Shape and Machine Checks
A cutting disc separates material; a grinding disc removes surface stock. In a cutting disc vs grinding disc comparison, the decisive detail is the task approved for the exact wheel, followed by its fit and allowed use with the grinder.…
Grinding Wheel Markings Explained: Dimensions, Abrasive Codes and Maximum Speed
Grinding wheel markings identify the wheel’s size, abrasive code, speed limit and use restrictions. Read those fields together, then compare them with the exact machine manual before accepting a replacement. A number such as 60 can describe grit; 22.23 can…
Thin Kerf vs Full Kerf Saw Blades: Cut Width, Plate Thickness and Saw Compatibility
Thin kerf vs full kerf is a tradeoff between a narrower cut and the stability a thicker plate can offer. Choose only after checking the blade against the saw, its mounting system and any required riving knife. Two blades can…
Types of Circular Saw Blades: Every Type and What It Cuts
There are about ten types of circular saw blades worth knowing, grouped by what they cut: ripping, crosscut, combination, framing, fine finish, laminate, non-ferrous metal, ferrous metal, and two diamond families for masonry. Each one is defined by four numbers…